The Douglas picnic bench is a heavy duty commercial grade picnic bench. The benches are delivered flat-pack, easy to assemble and as sturdy as a fully welded option.
The flat pack saves you on transport and ideal for mine or camp site furniture.
The steel tubing of the Douglas Picnic Bench is hot-dipped galvanised to Australian standards. All the hardware is marine grade 316 Stainless steel.
There is a choice of timbers. All our timber are Australian hardwoods and chosen for their durability under the harsh Australian sun.
The timber species shown is Blackbutt. You can choose any timber for your Wright Picnic. bench. A favourite is Blackbutt, however Jarrah a much darker timber is one of the best for outdoors.
All timbers on the Douglas picnic benches are pre-oiled in the factory with 3 coats of UV Osmo oil. No need to for oiling when you get your bench. It’s all ready to use.
When ordering your bench please let us know what extras you require. Our extras are as follows
- Umbrella Hole
- Bolt down lugs
- Floor protectors
- Timber types – Jarrah, Eastern Blackbutt, Spotted Gum (when available).
Douglas Picnic Table Sizes
- Length of table top and seats 1800mm or 2000mm. Larger tables on request.
- Width or table top – 700 or 800mm.
- Width of seats – 280mm
Weight Of Picnic Tables
The weight will vary on the timber chosen. Some timbers are heavier than others.
Here are the weights for some benches
- 1800mm with 700 wide top – 80kg
- 2100 with 800mm wide top – 100kg
How To assemble Your bench
To assemble your bench you would require the help of another person.
Follow the steps in the pictures below. Click on the pictures to enlarge the pictures. The Douglas picnic table is very similar to the wRight Picnic bench to assemble.