Wright Picnic bench with Spotted Gum timber.
Wright Picnic bench with galvanised frame and Blackbutt timber
Wright picnic bench bench made from Spotted Gum timber. Also known as the Aussie picnic bench
The Aussie picnic bench manufactured by Gyrobases from galvanised steel and spotted gum timber.

Wright Picnic Bench with Hardwood Slats

Wright Picnic Bench with Hardwood Slats. Aussie‑made, hot‑dipped galvanised steel and pre‑oiled hardwood. Flat‑packs for easy transport. Built for big blokes and outdoor adventures.

,


Meet the Wright Picnic Bench with Hardwood Slats—your new go‑to partner for outdoor get‑togethers, mine site breaks, or spontaneous alfresco feasts.

  • Tough as nails (and then some)
    Built from hefty hot‑dipped galvanised steel tubing (2.5 mm thick) and marine‑grade 316 stainless hardware—this bench laughs in the face of rust and rough use. It’s flat‑packed but as sturdy as a welded one.

  • Aussie‑hardwood goodness
    Choose from sun‑battered‑tested hardwoods like Blackbutt, Spotted Gum, or darker Jarrah. Your bench arrives factory‑pre‑oiled with three coats of UV Osmo oil—no extra coats needed.

  • Flat‑pack & fast‑assemble
    Just 5 simple parts and 12 bolts—that’s it. Two people, a few bolts, and you’re ready to seat a squad.

  • Sizes that fit your vibe
    Choose from 1200, 1800, or 2400 mm lengths. Tops come in 700 or 800 mm widths, with 280 mm wide seats. Table is around 180 x 80 cm, seats are 28 cm deep. 
    Typical weights: 1800 mm wide top = ~80 kg; 2100 mm wide top = ~100 kg.

  • Weather‑proof options
    All‑metal frame: go hot‑dipped galvanised for full‑exposure durability, or sleek powder coat for undercover settings.

  • Lean, mean, and feature‑keen
    Want extras? Throw in umbrella holes, bolt‑down lugs, or floor protectors.

  • Crafted right here
    100% Australian-made, keeping it local and quality-controlled.

Product Features

Made from heavy duty steel (2.5mm thick) tubes.
Flat pack so cheap to transport.
Suitable seating for 6 big blokes.
Size

Table Top – 180x80x3cm
Seats – 180x28x3cm
Weight

Approximately 80kg depending on seating and table top material choice.
Available colours

For outdoor we only recommend hot-dipped galvanised option. For benches that are used under cover, you can choose a powder-coated option.
Indoor or Outdoor Use

Indoor use or limited outdoor use, eg under cover, if powder coated finish
Hot dipped galvanised option available for 100% outdoor use next to the sea.
Types of Timber

Blackbutt, Spotted Gum, Jarrah
Assembly

Quick to assemble.
2 persons required.
Assembly tools supplied.
For assembly instructions contact Gyro.
Scroll to Top